Will Replacement Stainless Steel T-Bolt for Thule or DeWalt Contractor Truck Rack Fit Thule WingBar

Question

Question:

Hi . I would like to know if this T- bolt can fit in the t-slot available in the WingBar Evo crossbar Thanks

asked by: Oscar A

1

Helpful Expert Reply:

The Replacement Stainless Steel T-Bolt for Thule or DeWalt Contractor Truck Rack part # 853-5648 is a confirmed fit for the Thule WingBar Evo Crossbars.

expert reply by: Conner L

1

Answer 1

I went to our warehouse to pull this hex head bolt #908-1240-54. This bolt will have a property class of 8.8 and is classified as a high strength steel bolt. The point at which a bolt fails is the tensile strength, and because it is elongated (much…

view full answer...

Answer 2

I spoke with my Curt representative, who tells me that either Grade 8 or Grade 5 half-inch bolts are acceptable. In the past, they provided Grade 5 with their install kits, but recently changed to Grade 8. It doesn't matter which of the two…

view full answer...

Answer 3

We don't publish the torque values because they can change over time, but the correct torque value for the Curt #C11289 class I hitch is listed in step #3 of the installation instructions that I've linked for you.

view full answer...

Answer 4

Since I can't recommend one way or the other whether or not your wooden cargo box would be safe on the top of your vehicle travelling at highway speeds all I can tell you is that the M6 knob part #753-0783 that you referenced would require an…

view full answer...

Answer 5

The Replacement Bolt for Thule Sidearm TH594XT #915-068-054 that you referenced is Class 8.8. You can actually see the class on the head of it in the picture I attached.

view full answer...

Answer 6

Malone AirFlow roof racks like #MPG215 can use their own T-Slot Fit Kit #MPG8287 for Malone carriers or you can use another T-bolt fastener. I linked a photo showing a cross section of the AirFlow bar and the exact inside dimensions. I converted…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

That's ironic because currently (March 2022) Thule doesn't have a fit listed for the 2022 Subaru Forester Wilderness. With that being said, from our research it looks like the Wilderness models on the newer Subaru vehicles…

view full answer...

Will Replacement Stainless Steel T-Bolt for Thule or DeWalt Contractor Truck Rack Fit Thule WingBar

Product Page this Question was Asked From

Continue Researching