Weight Capacity of Replacement Air Spring for Firestone Ride-Rite Kit F6781

Question

Question:

I am building a small trailer and am planning to have air bag suspension instead of leaf springs. My question is how much or what is the maximum weight will they lift in pounds for Model 267C1.5 Item # F6781.

asked by: Randy G

0

Expert Reply:

The Replacement Air Spring for Firestone Ride-Rite Kit part # F6781 is rated for 2,500 lbs. If you need a higher rated option then the Firestone Red Label Air Spring, Double Convoluted part # F7703 is rated at 3,750 lbs. Please note, these bags are designed to be used in vehicle specific kits and are rated accordingly for this application.

expert reply by: Conner L

0

Answer 1

The different numbers on the Firestone air bags relates to the size of the bags. Since yours has 267CZ1.5 the correct replacement you&#39;d need is the part #F6781.

view full answer...

Answer 2

The Red Label bags like the part #F2706 are much heavier duty than the standard duty bags like the #F2598 that you also mentioned. The pressure rating is 150 psi vs. 100 psi, the weight capacity is 7,500 vs. 5,000 lb, and overall they are just…

view full answer...

Answer 3

The Brophy Stake Pocket Mounted Camper Tie Downs #TDSF are a universal application that fit most full-size, non-dually pickup trucks with straight fenders and single-wall construction. Because of this we don&#39;t have them in our fitguide…

view full answer...

Answer 4

Thanks for the pictures! The 5814 number you found actually has to do with the construction of the air bag and isn&#39;t really the part number for the bag, however since you sent in the picture of the instructions that shows you have the…

view full answer...

Answer 5

The Firestone Red Label Air Helper Spring #F7703 you were looking at carries a 7500lb weight capacity, but will not work with your Air Lift LoadLifter 7500 #AL57595 helper spring kit installed on your truck. Instead I recommend Firestone Ride-Rite…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 9

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 12

You'll need to do some slight measuring to ensure the fit of the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV on your 4WD 2022 Ford F-350 FX4 dually. Just measure from the top of the rear axle to the top of the…

view full answer...

Weight Capacity of Replacement Air Spring for Firestone Ride-Rite Kit F6781

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching