Replacement Hub Assembly That Uses Inner Bearing LM67048 and Outer Bearing LM11949
Question:
I have a hub assembly that is damaged. The bearing number for it are LM11949 and LM67048. Where can I get a Hub assembly that these bearings will fit?
asked by: Sharon K
Expert Reply:
Currently the only hub we carry that uses the Inner Bearing # LM67048 and Outer Bearing # LM11949 is the Trailer Hub Assembly # AH15450ECOMP. This is a idler hub that is to be used on 3,000lb axles. It has a 4 on 5" bolt pattern and uses threaded bolts rather than lug nuts to hold on the wheel. The bearing races are preinstalled so you will only need the bearings listed above, Grease Seal # SL150 and Grease Cap # TRAG-DC-196.
Products Referenced in This Question
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.500 Inch I.D.
- 2.332 Inch O.D.
- Redline
more information >
Grease Cap - 1.957" Outer Diameter - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.957 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Replacement Oil Seal Recommendation for Dexter Hub Part # 8-285-10UC3-A
- Q&A: How to Make 6-Way Square to 7-Way Adapter
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide