Replacement Bearing Kit For a Pop-Up Camper That Uses L44649 Bearings
Question:
Hi I have an old camper i want to change the bearing, seals, dust caps and washers if they are part of it. It looks like I have the e-trailer BS axel with L-44649 bearings what kit fit that Thanks
asked by: Gary M
Expert Reply:
The etrailer Axle # e32GR uses a Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-EZ-2K which will use the Bearing Kit # BK1-150. I do recommend pulling one of your hubs apart to verify that the bearings and seals match the spindle on your axle. For this bearing kit to fit you will need a BTR Spindle # TRU44FR on your axle that has a 1.5" landing for the grease seal and a 1.063" straight spindle for the inner and outer bearing. If you have any other measurements please let me know so I can confirm the correct kit.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: Replacement Axle And Leaf Springs For A 4' x 6' Single Axle Trailer
- Video: Review of Dexter Trailer Leaf Spring Suspension - U-Bolt Kit For 2000 lb Round Axle - APUBR-10
- Q&A: Could Shackle Bolt # 166081 be Used with CE Smith Suspension Hanger # CE14016G
- Shop: CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Shop: Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Video: Review of etrailer 2 Leaf Slipper Spring - e29SR
- Video: Redline Round Trailer Axle U-Bolt Mounting Kit Review
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Article: Where to Position the Trailer Axle?
- Video: Dutton-Lainson Trailer Winch DL24104 Review
- Video: Fulton Trailer Winch FWC7500100 Review
- Search Results: spring seats
- Search Results: b&w
- Search Results: bow rollers
- Search Results: winch cable
- Article: Trailer Wiring Diagrams
- Q&A: Can Slipper Spring # e29SR Install Below Trailer Axle
- Q&A: Replacement Slipper Spring Recommendation to Replace 31 inch Long Spring
- Q&A: Availability of Trailer Replacement Leaf Spring that is 30 inches Long for 1,800 lb Axle
- Video: Redline Trailer Suspension 166081 Review
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE14016G Review
- Search Results: s hooks
- Search Results: grease
- Q&A: Hanger Dimension Recommendation for Installing Slipper Springs SP-179275
- Q&A: Is It Normal For Open Eye Spring To Hit Frame Of Trailer When Loaded?