Will The Roadmaster Blackhawk 2 Connect To The Roadmaster Hard Rock Bumper Baseplate

Question

Question:

I have a Rock Hard 4x4 bumper on my 2016 Jeep Wrangler Unlimited Rubicon and want to make sure the Road Master tow bar bracket kit # RH-8000-RM from Rock Hard will work with the RM-422 tow bar. Thank you,

asked by: Bert C

1

Helpful Expert Reply:

The Roadmaster RH-8000-RM is just a simple bolt on direct-connect style baseplate so you'll have no issue connecting the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422 to it.

expert reply by: Kevin C

1

Answer 1

It sounds like you're using the Roadmaster Blackhawk 2 #RM-422 with a Blue Ox base plate kit. In which case the tow bar will use adapters, either #RM-031 or #BX88262, to connect. The picture I've attached shows the Blue Ox connector that…

view full answer...

Answer 2

I know you said you cleaned and lubricated the arms of the Roadmaster BlackHawk 2 All Terrain #RM-422, but I think you still need to clean the locking mechanisms which is why you're having an issue. Attached is a page from the instructions for…

view full answer...

Answer 3

You can connect your Roadmaster Falcon All Terrain Tow Bar #RM-522 to your Jeep's Blue Ox base plate kit #BX1126 with the adapter part #RM-031. You can see this USA-made adapter and how it installs by checking out the two linked videos that are…

view full answer...

Answer 4

I spoke with my contact at Roadmaster about how to find the serial number to get the proper adapter to use with the Blue Ox base plates. You will need to spread the 2 arms apart on the tow bar and then look for the sticker where the two arms come…

view full answer...

Answer 5

We do carry the adapters you are looking for so you can tow your Jeep with the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar #RM-422. The part you need is the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motorhome Mounted Tow…

view full answer...

Answer 6

Yes, you can flat tow your 2017 Jeep Wrangler JK, that has a AEV front bumper, using a Blue Ox #BX1133 Base Plate Kit, as long as your Jeep has the bolt on tabs as shown on page 4 of the Blue Ox installation instructions attached. Most Jeep owners…

view full answer...

Answer 7

Blue Ox is very thorough with their testing so if they told you that one of their tow bars like the #BX7420 would attach directly to the lugs of your AEV Premium Bumper it would be true this is possible and would work great.

view full answer...

Answer 8

The Blue Ox base plate kit part #BX1133 hasn't been confirmed as a fit for the AEV bumper on our end or with Blue Ox, but if AEV has tested it and confirmed that it does fit I would assume it does. The most popular tow bar to use with this is the…

view full answer...

Answer 9

There are a couple of things that could lead to the problem you are having with your Even Brake supplemental braking system #RM-9400. I checked with Roadmaster and the first thing the mentioned pertains to the vehicle it is install in. If your toad…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will The Roadmaster Blackhawk 2 Connect To The Roadmaster Hard Rock Bumper Baseplate

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching