Replacement Axle With 72 Inch Hub Face to Hub Face Measurement
Question:
I need an axle for my 1999 tahoe by thor glide lite it measures 69 inch spring to seat and 72 inch hub face to hub face.
asked by: William S
Expert Reply:
We do have a 72 inch hub face to hub face axle, but not one with a 69 inch spring seat to spring seat measurement. That said, what you can do is use the 72 inch axle and have new spring seats welded on where needed. There are two axles with a 72 inch hub face to hub face measurement, one with a 2,000 lb capacity and the other with a 2,200 lb capacity so be sure to get the one with the capacity you need:
- 2,000 lbs: Trailer Idler Axle Beam with Easy Grease Spindles # e78GR
- 2,200 lbs: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-7258
- Spring Seat # TRSS175
Then for both, if you need mounting hardware you can use the U-Bolt Kit # APUBR-10 and the correct hub for both is the Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels # AKIHUB-545-2-LFEZ-2K.
Products Referenced in This Question
Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Idler Axle Beam with Easy Grease Spindles - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- etrailer
more information >
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 1-3/4 Inch
- TruRyde
more information >
Product Page this Question was Asked From
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- 4-1/4 Inch Long
- Dexter
more information >
Continue Researching
- Q&A: Can etrailer 2,000 lb Axle be Flipped
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Axle And Leaf Springs For A 4' x 6' Single Axle Trailer
- Article: Trailer Tire Sizing
- Q&A: Is There An Axle Flip Kit for a 2,000 Lb 1-3/4 Inch Diameter Axle
- Q&A: Could Shackle Bolt # 166081 be Used with CE Smith Suspension Hanger # CE14016G
- Article: Where to Position the Trailer Axle?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How To Measure For Hub-Face And Spring Center Measurements On An Axle
- Article: Trailer Wiring Diagrams
- Q&A: Torque Spec for U-Bolts on 2K Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long
- Article: How to Raise Your Travel Trailer Height
- Q&A: Can an Axle Over Under Kit be Made for 1-3/4 inch Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires