Is Yakima SkyRise Replacement Mounting Bracket Available Without Clamp

Question

Question:

can i purchase just the railing without the clamps?

asked by: Jonathan R

0

Expert Reply:

I checked with Yakima and the mounting bracket (railing) without the clamp is not available separately; the mounting bracket does only come with the clamp so you would need the full part:

- Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent # 8880735

expert reply by: Kyle S

0

Answer 1

The Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent #8880735 will be able to clamp around the HD crossbars on your Yakima OverHaul HD ladder rack, so as long as you're able to find the hardware to mount this bracket to the underside…

view full answer...

Answer 2

This Replacement Mounting Bracket #8880735 is for the Yakima SkyRise Rooftop Tent like #Y07437. These tents and their clamps are compatible with most aftermarket round, square, aero, and elliptical crossbars including Yakima HD crossbars like…

view full answer...

Answer 3

I reached out to Yakima and found that the opening for the Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent #8880735 is 4". This allows it to fit their 4" HD crossbars. In general, the Yakima SkyRise Tent like the #Y07436 will…

view full answer...

Answer 4

The Replacement Bracket #8880735 measures 18-3/8" long and 2-3/4" wide. It is used on Yakima Skyrise tents such as Yakima SkyRise HD Tent for Roof Rack Crossbars - 2 Person - 400 lbs #Y07436.

view full answer...

Answer 5

The bolt hole spacing for the Replacement Mounting Bracket #8880736 is 4" on center (see attached). This will fit with the Replacement Clamp Assembly #8880737 and to your 2008 Honda Element factory crossbars just fine, you just have to make sure…

view full answer...

Answer 6

We've had customers with Class B RVs like your RoadTrek Zion leave reviews for how well the Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers #Y74ZR worked for them so I would feel confident letting you know how well it would work…

view full answer...

Answer 7

I have some info that can help, see below: **Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76143. When it comes to vertical weight and tongue weight, those two terms mean the same thing in regards to hitch receivers.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Is Yakima SkyRise Replacement Mounting Bracket Available Without Clamp

Product Page this Question was Asked From

Continue Researching