Replacement 2.125 Inch Grease Seal For Trailer Spindle
Question:
My spindle has a 2-1/8 inner seal surface. The bearing surfaces are the correct size but I obviously need a different rear seal. Is it available?
asked by: Alan
0
Expert Reply:
The Grease Seal - Double Lip # GS-2125DL has an inner diameter of 2.125 inches, and an outer diameter of 3.376 inches. This is a single lip seal 10-1 replacement.
I attached a review video link below.
expert reply by:
Noah E
0
Products Referenced in This Question
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 14125A
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Can the DeeMaxx Trailer Wheel Lug Nut Be Used on an RV
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Tell if 10K Dexter Nev-R-Adjust Electric Trailer Brakes Are for Driver or Passenger Side
- Q&A: What Size Socket is Needed for DeeMaxx Trailer Wheel Lug Nut
- Q&A: Hydrastar Disc Brake Kit For a 2018 Grand Design Momentum Triple Axle Toy Hauler With 7,000LB Axles
- Q&A: How To Use 17.5" Wheels On a 7,000 Lb Trailer Axle
- Article: Trailer Maintenance Schedule
- Article: Trailer Wiring Diagrams
- Q&A: Should Brake Pads Constantly Touch The Rotor In A Disc Brake Setup
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: How to Measure a Trailer Axle
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub