Replacement Idler Hubs For A Boat Trailer With 4 On 4 Hubs That has a Inner Diameter of 1.77 Inches
Question:
I have a boat trailer that has .748” straight spindles and 4 on 4 hubs that measure 1.77” inner diameter where the race sits. What is the replacement hub?
asked by: Phil
Expert Reply:
The bearing numbers that you provided LM11949 are an unique agricultural bearing that we do not offer. You will have to replace the whole axle to get the hub and drums to work that I mentioned above.
The Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-440-2-2K is the correct replacement hub for you, if your inner and outer bearings are the same size and have the number # L44649 on them.
This hub assembly is for a 2,000 pound axle that has an inner and outer bearing # L44649 which has an inner diameter of 1.63 inches.
This idler hub is pre-greased and is easy to install, there is no need to pack the bearings. The hub has a sturdy iron construction and has a zinc-enriched paint finish. It has a weight capacity of 1,000 pounds and fits wheels between 8 inches to 14 inches.
I attached a review video link below.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Q&A: Replacement Trailer Hubs, Wheels, And Tires For a Homemade Motorcycle Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Rooftop Cargo Carriers
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: RV and Camper Types, RV Classes
- Article: Trailer Tire Sizing
- Article: How to Measure a Trailer Axle
- Q&A: 10k Dexter Replacement Hub for a 8-415