Determining The Correct Landing Gears For A 1999 Coachmen Catalina 5th Wheel Trailer

Question:

will this set work for my 25 ft coachman catalina. It is electric or hand crank. The jacks are on the inside of the frame, will the motor thats on the 5th wheel work on these jacks. Thank you.

asked by: Curtis R

Expert Reply:

Typically we recommend measuring the weld stops of your current landing gear and choosing a matching landing gear so that you don't have to cut off the brackets and weld on new ones. The etrailer Landing Gear Set w/ Handle # RVLG-8HDL has a 15-1/2" distance from bottom of upper weld stop to top of lower weld stop and a 17-1/2" distance from top of upper weld stop to bottom of lower weld stop (pictured below).

This landing gear comes with a manual crank but the motor # LC142178 can be purchased separately for quicker operation. If you don't already have a similar Venture motor it most likely will not mount up to this set.

expert reply by: Kevin C