Replacement Axle or Spindle For 91 Inch Long Axle
Question:
Axle replacement or new spindles. 91” to hub face anand 68 “ to center of springs
asked by: Paul D
Expert Reply:
Thank you for providing those measurements. Unfortunately we do not have an axle that matches your current length, or one that is close enough to use. For a spindle, you will need to also know the axle capacity. Based on those measurements it is likely you have a 3" diameter axle that would need the #42 Spindle # TRU37FR. Make sure if you're replacing the spindle that you take it to a local axle shop or welder with axle experience.
The only other option would be a Timbren Axle-Less System like the # ASR5200S01. This fits any frame width and replaces the suspension system so you don't have to worry about the length of the axle or spring seat measurement. This particular system would replace a 5,200 lb axle but you would need to choose the correct one based on capacity.
I have attached a link to all of our available spindles and Timbren systems that you can check out.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure a Trailer Axle
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Trailer Hitch
- Search Results: 44649
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Trailer Wiring Diagrams
- Q&A: Seal With Dimensions to Replace 171255UC
- Shop: Grease Seals 10-36 (pair)
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Search Results: 25580
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Search Results: dust cap
- Shop: Fifth Wheel Hitch
- Article: Most Popular Wheel Bearings
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Gooseneck Hitch
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Search Results: equalizer
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Suspension Enhancement
- Article: Where to Position the Trailer Axle?
on Trailer Spindles
