Options for Kwikee Steps with a 151320 Gear Box Needing replacement Parts

Question

Question:

kwikee step gearbox 151320 what motor do i use??? KWIKEE 11909 SEARES 38 STEP CONTROL #909510001

asked by: Maurella

0

Expert Reply:

I do have an alternate option for you, but the Kwikee Steps that use the 151320 Gear Box are discontinued and replacement parts for that step series are no longer available.

I recommend completely replacing the steps with the Kwikee Electric RV Step Complete Assembly - Double - 32 Series - 24" Wide # LC372261. This would bring your RV steps up to date with a product that has replacement parts more readily available.

expert reply by: Scott S

0

Answer 1

We unfortunately don't have a mounting hardware kit for the 26 Series Replacement Step, Motor, and Control for Kwikee RV Electric Steps #LC371136. You can either use your old hardware or get replacements from your local hardware store to match…

view full answer...

Answer 2

I spoke with my contact at Lippert and the main difference between the Kwikee Series Triple Electric Steps referenced in your question are their specific dimensions. The Kwikee 25 Series #LC3658374 has a 24 inch wide step with a 7 inch rise. This…

view full answer...

Answer 3

Thank you for the pictures- they're always helpful! I have a solution for you, but the Lippert gear box you were looking at is a replacement for the newer Kwikee 32 Series Steps. I spoke with my contact at Lippert and they said that the gearbox…

view full answer...

Answer 4

I did some research, and yes, the Replacement Gear Box and A Linkage for Kwikee Electric RV Steps #LC379160 you mention, will work for your Kwikee 32 Series Steps. The curved arm piece you're looking for isn't available separately,…

view full answer...

Answer 5

Yes the Voyager RV LCD Observation Monitor part #VO34FR is the exact same as the VOM-718 that you have now so it would work great as an exact replacement.

view full answer...

Answer 6

In order to replace the Voyager Monitor VOM-783CT you will need both the Voyager RV LCD Observation Monitor part #VO34FR and CRT to LCD Monitor Cable Adapter part #31100041.

view full answer...

Answer 7

We may have a trailer hitch that will work with your 2003 Coachmen Mirada, however the Curt Custom Fit Class V Trailer Hitch, #C14048, that you referenced will not fit Class A motor homes. Before installing a Class V trailer hitch on your Mirada, I…

view full answer...

Answer 8

I have a solution for you, however after speaking with the manufacturer for the Voyager AOM-58 back up camera I found that they no longer make the 5" monitors. There are two options for you; product #VOM43HDCL1B is a 4.3" monitor and…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Options for Kwikee Steps with a 151320 Gear Box Needing replacement Parts

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching