Truxedo Truxport Replacement Tarp for 2013 Ram 1500 6-1/2 ft Bed

Question

Question:

Do you have a replacement tonneau tarp for a Truxsport on a 2013 Ram 1500 with 6.4foot box, no Ram boxes that has the plastic strip retainers on the front and back of the cover. It measures about 76inch lg x 69inch wide. I have attached a picture of the plastic strip that is on the front and back that slides into the extruded channel.

asked by: Jason W

0

Expert Reply:

Since the Truxedo Truxport you have for your 2013 Ram 1500 6-1/2 foot bed is the part # TX246901 the correct replacement tarp is the part # TX2469-CVR.

expert reply by: Jameson C

0

Answer 1

The correct replacement cover for the TruXedo TruXport Tonneau Cover part #TX246901 on a 2017 Ram 1500 6.5' bed is the Replacement Tarp for TruXedo TruXport Tonneau Cover part #TX2469-CVR.

view full answer...

Answer 2

The Westin Platinum Series Oval Nerf Bars part #21-3565 which are a fit for a 2017 Ram 2500 Crew Cab are a complete kit that comes with everything you need to add nerf bars to the vehicle including; two bars, custom mounting brackets, and hardware.…

view full answer...

Answer 3

I have a solution for you, but the Westin Platinum Series Oval Nerf Bars #21-3565 are not a confirmed fit on your 2019 Ram 1500 Classic Quad cab-they are instead designed for the Crew cab models. Instead, I recommend the Westin Platinum Series Oval…

view full answer...

Answer 4

If you are going to be at highway speeds you'd need to have the TruXedo TruXport #TX246901 either fully open or fully closed as there isn't a way to secure it when it's only partially open.

view full answer...

Answer 5

The serial number you provided corresponds to the Truxedo #TX246901, so the Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover - Black #TX2469-CVR is what you're looking for. You will need to put your serial number on the page…

view full answer...

Answer 6

The Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover #TX2469-CVR is just the tarp and would require all of the original hardware and crossmembers in order to be installed.

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Truxedo Truxport Replacement Tarp for 2013 Ram 1500 6-1/2 ft Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching