Parts Needed To Add 4-Way Flat Connector On a Rialta Camper With 6-Way Pin Connector
Question:
Will this HM47320 adapter work for a Rialta camper with a 6pin round connector to a trailer with 4pin flat. The current 6round to 4flat adapter is missing pins, however works for running, Turn R and L, but not stop lamps. So I need an adapter the merges the functions of StopandTurn Pinout looks to be Ground L-Turn R-Turn Stop Running BackupCenter Thanks
asked by: Ned H
Expert Reply:
To connect your 4-way trailer to your Rialta camper you will need a Hopkins Tail Light Converter # HM48847 and Hopkins Endurance 4-Way Flat Trailer Connector Socket # HM48030. These will allow you to tie into the wiring going into your 6-way connector to combine the turn signals and brake lights to work on the 4-way wiring. The converter is labeled to ensure you connect up the wiring correctly and the socket has mounting holes allowing you to leave it installed. Or you can wire it to a 6-Way Connector # RM-910030-8 if you want to make it removable.
The Hopkins Endurance Flex Trailer Connector Adapter w/ LED Circuit Tester # HM47320 does not convert any of the wiring and only removes 2 of the pins so it will not allow you to have your lights working correctly.
Products Referenced in This Question
Hopkins Endurance 4-Way Flat Trailer Connector w/ 48" Harness and Ergonomic Pull
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Hopkins
more information >
Hopkins Tail Light Converter - LED Compatible
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 3-to-2 Converter
- Hopkins
more information >
RoadMaster 6-Wire Trailer Connector - Trailer End
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- Plug Only
- 6 Round
- Roadmaster
more information >
Product Page this Question was Asked From
Hopkins Endurance Flex Trailer Connector Adapter w/ LED Circuit Tester - 6-Pole to 4-Pole
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 6 Round
- Plug and Lead
- 4 Flat
- Hopkins
more information >
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Wiring
- Shop: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Shop: Roadmaster Extension Loop for Towed Vehicles - Dual 4-Way Flat Trailer Ends - 6' Long
- Shop: Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End
- Shop: Hopkins Endurance 4-Way Flat Trailer Connector w/ 48" Harness and Ergonomic Pull
- Video: Roadmaster Tow Bar Wiring RM-300150-00 Review
- Shop: Hopkins Trailer Connector Adapter - 7-Pole Round Pin to 7-Pole RV
- Shop: Base Plate for Tow Bar
- Search Results: jumper harness
- Search Results: 30717
- Search Results: circuit tester
- Search Results: 4 flat male to 4 flat male
- Search Results: 47465
- Video: Hopkins Wiring - Wiring Adapters - HM47180 Review
- Video: Hopkins Wiring - Wiring Adapters - 47405 Review
- Shop: Mighty Cord Trailer Connector Adapter - 4-Way Flat to 6-Way Round - 12" Long
- Shop: Hopkins Tail Light Converter - LED Compatible
- Q&A: How To Make 5' 6-way Round to 4-way Flat Wiring Adapter
- Q&A: Will the Hopkins Endurance Flex Trailer Connector Adapter # HM47320 work on a Harley Trike
- Q&A: What Are My Wiring Options for Flat Towing a 2011 Honda CRV
- Q&A: Adapter for 7-Way or 6-Way to Plug Into 4-Way on Vehicle Being Flat Towed
- Q&A: Adapting a 4-Way Flat Trailer Connector on 2011 Toyota Tacoma to 6 Round on 1983 Coleman Camper
- Q&A: Troubleshooting Trailer Wiring Connection for Lack of Brake Lights
- Video: Roadmaster Tow Bar Wiring RM-164-7 Review
- Q&A: 3-Wire to 2-Wire Converter For Connecting Mack Dump Truck To Trailer With 7-Way Blade Connector
- Search Results: rm~164~7
- Search Results: tow bar wiring
- Video: Deka Jacketed 6-Wire Installation
- Video: Hopkins Wiring - Trailer Connectors - HM48440 Review