Replacement Wiring Harness For a Adams Drift Boat Trailer
Question:
I have an adams drift boat trailer and I want to replace the entire wiring harness without doing any splices. The harness itself is a four prong flat type in the front and ends in a standard three prong plug for the 6.5x2 oval recessed submersible tail light. Drift boat trailers have short frames. Can you help me?
asked by: Verlon H
Expert Reply:
The 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB would be the closest harness we carry for your Adams drift boat trailer. This will require you to splice the 3-Wire Pigtail # A45PB for your Optronics Fleet LED Trailer Tail Lights # TLL12RK as we do not carry a harness that has the connectors you need already spliced into the harness. I recommend using the Deka Heat Shrink Butt Connector # DW05744-5 to make the connections. You will need 2 of these 5 packs to get the 6 connectors you need.
If you do not feel capable of making the splices you can have it done at your nearest service center. You also may need to have the harness ran as the connectors may not fit through the frame when connected.
Products Referenced in This Question
25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 21 - 30 Feet Long
- Plug and Lead
- 4 Flat
- Optronics
more information >
3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Straight Pigtail
- Optronics
more information >
Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5
- Wiring
- Wire Connectors
- Butt Connectors
- 16-14 Gauge
- Deka
more information >
Product Page this Question was Asked From
Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Oval
- Kit
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2W Inch
- Red
- Optronics
more information >
Continue Researching
- Article: Trailer Maintenance Schedule
- Search Results: trailer coupler locks
- Search Results: trailer grease
- Search Results: hitch lock
- Shop: Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Shop: Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Video: Optronics LED Trailer Tail Lights with Grommet and Pigtails Review
- Video: Optronics LED Submersible Tail Light Review and Installation STL16RB
- Video: Optronics LED Combination Trailer Tail Lights Installation
- Video: Buyers Products 7 Color Coded Terminal Trailer Wiring Junction Box Review
- Video: Optronics LED Combination Tail Light Kit Installation
- Video: Optronics Trailer Lights - Tail Lights - STL17RB Review
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy
- Q&A: How To Wire In The Hopkins 7-Way Molded Trailer Wire Connector
- Q&A: Do the Tail Lights in Trailer Light Kit # TLL12RK have Reflective Lenses
- Q&A: Is Optronics LED Trailer Tail Light # STL57RB a Single Light or a Pair
- Q&A: Bearing Buddy for Hub with 1.928 Hub Bore & 09074 Outer Bearing
- Q&A: Replacement Recommendation for Rectangular Tail Lights on Trailer
- Q&A: Replacement Stop/Turn/Tail Light Option for a Karavan Boat Trailer
- Q&A: Red Oval LED Stop/Turn/Tail Light to Replace Truck-Lite 60 Series
- Search Results: bearing buddy
- Search Results: 4 wire flat dust cover
- Search Results: 4 wire junction box
- Search Results: trailer light mounts