Is There a Trailer Hitch for a 2019 Ford Fiesta Sedan?
Question:
i need a 2 inch reciever trailer hitch installed on my 2019 ford fiesta 4 door car can you help me
asked by: Robert J
Expert Reply:
The only hitch available for your 2019 Ford Fiesta Sedan and it is the Draw-Tite Sportframe Trailer Hitch Receiver item # 24910. This hitch is custom fit and bolts directly to your Ford Fiesta with included hardware. This hitch is a Class I with a 1-1/4" receiver. There are no 2" receivers available for your car. This hitch has a 2,000 lbs towing capacity and a 200 lbs tongue weight. You will want to verify with your owners manual to ensure you do not exceed this capacity.
If you are planning on towing you will need the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118766. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, on the driver's side and passenger's side.
For a ball mount you'd need the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: Availability of Trailer Hitch for 2019 Ford Fiesta Sedan
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Does Draw-Tite Trailer Hitch 13091 Require Drilling to Install on 2001 Ford Ranger
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Trailer Hitch Receiver for 2004 Ford Ranger Edge
- Q&A: Trailer Hitch for 2008 Ford Ranger that Allows Full Size Spare
- Q&A: Recommended Trailer hitch Receiver For a 2008 Ford Ranger 4x4
- Q&A: Comparing the Curt Round Hitch 13138 and Curt Square Hitch 13019 for a 1992 Ford Ranger
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: Which Hitches are Made in the USA