Troubleshooting The Control Panel For The Lippert Ground Control 3.0 That Has A Blank Screen

Question:

Blank screen on control panel. What is the easiest way to get cover off

asked by: Danita

Expert Reply:

Before you start to disassemble your control panel for your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote # LC358590, I recommend attempting to first disconnect the panel from power for around 15 minutes and check again.

This usually fixes the blank screen issue, however if it does not, you can also check the 15amp & 35amp fuse on the feed to the control panel. If they are blown then simply replace the fuses and check again for functionality.

You might also consider verifying that your ground connections are all clean and secured properly, and that you're receiving 12 volt power by using a multimeter # PT89ZR.

If you're still wanting to take the cover off, you should be able to remove the screws from the back of the unit to free the cover from the rest of the housing.

If you're still having no luck , you going to need to replace the unit with # LC421484.