Replacement Hub for 2009 Karavan WC-2200-84 Series Trailer
Question:
Need to do a complete hub replacement. What do you recommend? Vin number of trailer is 5KTWS17189F565593
asked by: Linus
Expert Reply:
According to Karavan, your current inner and outer bearing are the # L44649 and your current hubs have a 5 on 4-1/2 bolt pattern. There is no information on the axle capacity but based on the GVWR of 2,675 lbs for the trailer I would recommend the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13315 as a replacement.
In addition to the hub, you will need to get a different seal since the # CE13315 uses a seal with a 1.50" inner diameter. Your current spindle needs a grease seal with a 1.25" inner diameter. For a grease seal that will fit you can use the # 34823.
Products Referenced in This Question
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: l44649
- Search Results: 5 on 4 12 wheel
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-2K Review
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: l44649 hub
- Search Results: 5 on 41 2
- Search Results: 5 on 41 2
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Replacement Hubs for 2,700 lb Axle
- Q&A: Recommended Replacement Hub For Boat Trailer With 1-1/16" Straight Spindles and 5 on 4-1/2" Wheels
- Q&A: How to Determine Correct Replacement Hub For Jet Ski Trailer
- Q&A: Replacement Pre-Greased 5 On 4-1/2" Hubs For Trailers Using L44649 Inner And Outer Bearings
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Video: CE Smith Trailer Hub Assembly Review and Installation
- Video: Rhino-Rack Sunseeker Awning Review
- Q&A: How Much Grease Should be Added to the Bearing Buddy Bearings
- Search Results: ce13315
- Search Results: hub kit
- Q&A: Replacement Bearings and Seals for a ShoreLandr Trailer with Dico 45263 Hubs