Does Yakima RoadShower Portable Solar Shower for Roof Racks Install Inside of Roof Rack Feet

Question

Question:

Why does it need to be installed on the inside of the feet? The pictures show that it is installed.

asked by: Richard N

1

Helpful Expert Reply:

Yakima does recommend installing the Yakima RoadShower Portable Solar Shower for Roof Racks # Y89VR on the inside of the roof rack towers. This is so that the rack has both towers supporting the weight of it when it is filled up. The reason you see it mounted on the outside of the ladder rack feet in our product pictures is ladder racks have much higher weight capacities.

expert reply by: Jameson C

1

Answer 1

The Yakima RoadShower Portable Solar Shower for Roof Racks part #Y89VR is an excellent option for showering or cleaning off gear. It holds up to 7 gallons of water which is pressurized so flow will not be an issue. It mounts to standard roof rack…

view full answer...

Answer 2

Yes. You can mount the Yakima RoadShower Portable Solar Shower for Roof Racks - 4 Gallon #Y79VR to the factory crossbars on your 2021 Subaru Outback. The RoadShower tank is 6-1/8" wide, so you'll need roughly that much bar space inside the…

view full answer...

Answer 3

The Yakima RoadShower Portable Solar Shower for Roof Racks - 10 Gallon #Y29VR is the current 10 gallon road shower that Yakima offers and it is considered the Yakima RoadShower 10G. It is also available in 4 gallon #Y79VR and 7 gallon #Y89VR. These…

view full answer...

Answer 4

If the instructions for the Yakima 60" Tracks for Roof Racks #Y01135 state to use the mounting bolts on every other hole then the 12 mounting bolts included in part #Y8810155 is enough for 2 tracks. Although you can cut them to size, if you use…

view full answer...

Answer 5

The bolts in the Replacement Capnuts, Washers and Bolts #Y8810155 are 1" long. They are #10-32 thread if you would like to acquire some longer bolts from a local hardware store.

view full answer...

Answer 6

The Replacement Bracket #8880735 measures 18-3/8" long and 2-3/4" wide. It is used on Yakima Skyrise tents such as Yakima SkyRise HD Tent for Roof Rack Crossbars - 2 Person - 400 lbs #Y07436.

view full answer...

Answer 7

The screws that come with the Yakima Y8810155 are #10-32x1” and the capnuts are 1/2 x 1-1/4”.

view full answer...

Answer 8

The only method of attachment that Yakima offers for the SkyRise HD part #Y07437 is the clamp style you mentioned. I attached a picture of what it looks like. I also attached a review video link for the tent for you to check out as well. The clamp…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Does Yakima RoadShower Portable Solar Shower for Roof Racks Install Inside of Roof Rack Feet

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching