Can Trailer Leaf Spring SP-177275 be Used in Place of 1,500 lb Axle Leaf Spring
Question:
Hello, will these 1,000lb slipper leaf springs work with a smaller pwc trailer? I have the 1,500lb version I purchased earlier this year and they seem stiff for my load of, at most, 3 fishing kayaks. My axle is 1.5inch x 1.5inch and the current slipper leaf springs I have are 24 /58. Thanks
asked by: Matt K
0
Expert Reply:
Yes, the 2-Leaf Slipper Spring part # SP-177275 will work great in place of a similar setup designed for a 1,500 lb axle. This is for a 1,000 lb axle so it will be a bit softer. It's also the same size as what you have so it will easily bolt up in place.
expert reply by:
Jameson C
0
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 1000 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 24-5/8 Inch Long
- Universal Group
more information >
Continue Researching
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Parts Needed For Adding 1,000LB Slipper Springs To a Cart With No Suspension
- Q&A: Availability of Stainless Steel U-Bolts for 1-1/2" Square Axle
- Q&A: Correct Replacement Leaf Springs for Malone Microsport Trailer
- Q&A: Replacement Dexter Axle Disc Brake Calipers that have 89-5 Stamped on Them
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Article: Trailer Tire Sizing
- Q&A: Are Radius End And Flat End Slipper Springs For A Trailer Interchangeable?
- Article: Most Popular Wheel Bearings
- Article: Rust Prevention
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs