Will Fulton Bolt-Thru Swivel Marine Jack Fit the Mount of a Fulton Magnum Series Jack

Question:

Have a Fulton Magnum Series, Would like to know if the FXP15L will fit if i just unbolt center and swap jacks, is bolt pattern same, center bolt same size?

asked by: Mitch R

Expert Reply:

I recently learned that the Magnum series jacks could have a different bolt pattern than the new jacks. Because of this it is not likely a new one will fit on the welded on bracket of the old one. To be safe I recommend adding mounting bracket # P9012-00. The holes are 3 inches apart on center.

The bolt is a 1/2 inch coarse threaded bolt that is 1-1/16 inches long. If all that matches what you have then you will not need the new weld-on bracket.

If the mount is the same or if you do need the new mount I would go with a jack designed for this type of mount such as # FXP10W0301. Otherwise you may need to make modifications to the bracket on the bolt-through style to get it to fit.

expert reply by: Michael H