Do You Carry The Kuat Transfer V2 Bike Rack

Question

Question:

Do you still sell the Kuat Transfer bike rack TSO2B or TSO2G?

asked by: Beth L

0

Expert Reply:

We sell the Kuat Transfer V2 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount, part # KU84FR which is a 2" model, and the Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount. part # KU74FR, which fits 1-1/4" and 2" trailer hitches.

I have included product description links and a video review link below.

expert reply by: Mark Smith

0

Answer 1

I do have an option for you but in order to carry a carbon fiber frame bike you'll need a wheel mount style rack as you cannot use a frame mount style rack on a bike with carbon fiber frame. The best RV rated option we have for this is the Kuat…

view full answer...

Answer 2

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

view full answer...

Answer 3

Both the Kuat Transfer V2 for 2 inch hitches #KU84FR and the version that fits both the 2 inch and 1-1/4 inch part #KU74FR use a similar type of wedge anti-rattle device that pushes out against the hitch tube to reduce movement and create stability.…

view full answer...

Answer 4

I have a few different bikes racks for you that will carry e-bikes with fenders. That said, you will need to go with a frame mount style as you can't use a wheel mount bike rack on a bike with fenders. The best option for you will be the…

view full answer...

Answer 5

The Kuat #KU74FR Transfer V2 that you'd looked at, which is compatible with both 1-1/4 and 2 inch hitches has a 40 lb per bike capacity, so it wouldn't safely carry your e-bikes. However the #KU84FR V2 model which fits 2 inch hitches only,…

view full answer...

Answer 6

I checked with Kuat, and was able to find out the exact distance from the center of the hitch pin hole to the closest part of the of the Kuat Transfer V2 Bike Rack for 2 Bikes - 2" Hitches item #KU84FR. As you can see by the accompanying…

view full answer...

Answer 7

The Hollywood Racks Sport Rider SE 2 Electric Bike Rack part #HLY84FR is not rated for use on trailers because the ride at the back of a trailer is much rougher than that on a vehicle. The reason for this has to do with the design of the suspension…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 11

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 12

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike retaining hook…

view full answer...