Recommended Blue Ox Base Plate Kit for 2014 Jeep Wrangler Rubicon Edition
Question:
Hello, I have a stock 2014 rubicon. Which blue ox plate do I need? I have the bx towbar already bx7365 Alpha towbar already. Thank you.
asked by: Medford B
Expert Reply:
For the 2014 Jeep Wrangler Rubicon Edition, the proper Blue Ox Base Plate Kit, is # BX1134. This will mate well to your Blue Ox Alpha 2 Non-Binding Tow Bar, # BX7380.
You will also need a wiring solution to link your indicator lights to the RV and a supplemental braking system. I suggest the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, # HM56200 along with the Brake Buddy Stealth Supplemental Braking System, # HM39530 as these are not only a plug and play installation for the wiring, but they to will mate well to each other. The Hopkins wiring kit, # HM56200 plugs in quickly and easily without the need to cut or splice any wires. This provides a 4-way flat plug at the front of your Jeep which plugs into the Brake Buddy Stealth # HM39530 without needing to cut or splice either.
The Brake Buddy Stealth is a semi-permanent installation. You don't need to reactivate any parts when you're getting ready to tow, nor do you need to remove anything when you're done towing. The Brake Buddy Stealth can stay in your vehicle year-round. Once you're ready to tow again, just plug your towed car into your RV and the system will automatically begin functioning. The Stealth controller doesn't just work when you're flat towing the Jeep but it also acts as a proportional trailer brake controller for when you're towing a trailer with the Jeep. Just press the mode control button on the side of the controller to switch from supplemental braking system mode to trailer braking mode. The Stealth controller works with trailers that have up to 4 axles (8 brake assemblies) and electric brakes.
Products Referenced in This Question
Blue Ox Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Blue Ox
more information >
Blue Ox Alpha 2 Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,500 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6500 lbs
- Fits Blue Ox Base Plates
- Blue Ox
more information >
Brake Buddy Stealth Supplemental Braking System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Hydraulic Brakes
- Brake Buddy
more information >
Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Tow Bar Wiring
- Plugs into Vehicle Wiring
- Wiring Harness
- Custom
- Tail Light Mount
- Hopkins
more information >
Product Page this Question was Asked From
Blue Ox Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Blue Ox
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: Where to Position the Trailer Axle?
- Q&A: Replacement Hub Recommendation for Dexter Hub 8-250
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Q&A: Is the Aluminum A-Frame Trailer Tongue Toolbox 350970 Waterproof
- Q&A: Mounting the Aluminum A-Frame Trailer Tongue Toolbox to the A-Frame of The Trailer
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Recommended Flat Towing Equipment For A 2017 Jeep Wrangler JK Unlimited
- Q&A: Blue Ox Base Plate Kit that Fits 2016 JK Rubicon with Smittybilt Gen 1 Front Bumper
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: Must-Have Flat Towing Components
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)