bing tracking image
Q & A Icon

What Size and Grade Bolts Should be Used to Install Titan Model 60 Brake Actuator  

Question:

WHAT SIZE and CASE STRENGTH BOLTS DO YOU RECOMMEND. WILL BOLT NEW COUPLER ON. THIS TITAN SURGE COUPLER WILL REPLACE AN OLD WELDED ON SURGE COUPLER. THE OLD ONE LOOKED LIKE AN ATWOOD and WAS WELDED ON. OLD COUPLER WAS CUT and GROUND-OFF. REMAINING TRAILER TONGUE IS 3inch WIDE and APPROX 9s long. TRAILER: MADE MAY 1984. V/M CUSTOM BOAT TRAILER, GVWR = 5000 LBS., STOP CAPACITY- 3500 LBS. ALSO REPLACING THE BRAKE DRUM ASSEMBLIES WITH YOUR TITAN BRAKE ASSEMBLIES.

0

Expert Reply:

The Titan brake actuator # T43397007K will take 1/2 inch by 4 inch grade 5 bolts, nuts, and lock washers. Since this is a boat trailer if you can find some grade 5 zinc coated or stainless steel they will have better corrosion resistance. I have linked a video review and the installation instructions for this actuator for you.

expert reply by:
0
Michael H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>