Is Tool Needed to Install Rubber Trim for RVs SR78FR

Question

Question:

A install tool is mentioned in your description, but I cant locate the tool within your product line. Please help.

asked by: Wes

0

Expert Reply:

We don't carry a trim tucking tool but they are pretty easy to source elsewhere to help install the RV trim part # SR78FR.

expert reply by: Jameson C

0

Answer 1

The Rubber Trim for Vehicle Trim Molding, #SR78FR is 7/8" as shown in the attached and identified as fitting 3/4" tracks as measured on the inside, such as your measurement is taken.

view full answer...

Answer 2

There is not a way I could verify whether or not the Rubber Trim Insert for RV, Marine, and Utility Vehicle Trim Molding #SR78FR would work with your camper. As long as the tracks in the window are 3/4" then this will fit your windows. We do…

view full answer...

Answer 3

The UWS A-Frame Trailer Toolbox #UWS01039 measures 18" wide on the outside so if you use the larger Ego batteries that give you the 18" this won't be wide enough and you'll need to use a different box like the DeeZee Specialty…

view full answer...

Answer 4

There's no guide available to tell me what size trim insert you need but you can measure the track to find to start looking for the correct size. The Rubber Trim #SR78FR you were looking at is designed to fit a 3/4" track. If you could take…

view full answer...

Answer 5

Yes, the Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding #SR86ZR only comes in black, however this is 15' and it is offered in a longer 30' length should you be interested: -Rubber Trim for RVs, Boats, and Utility Vehicle Trim…

view full answer...

Answer 6

Hey Josue, so I can't for sure identify what pin box you have on your camper but it does look like the standard Lippert 1621 that the Gen-Y part #GY58GR is designed to fit. If your current pin box is 12 inches wide and the distance between the…

view full answer...

Answer 7

The #DR47FR does not fit the hybrid or PHEV models. It fits all other models excluding these two. This means the Draw-Tite hitch will not fit your 2020 Ford Escape Hybrid. However, the etrailer Trailer Hitch Receiver #e89YR is confirmed to fit the…

view full answer...

Answer 8

Thank you for the detailed description of the replacement vent lid you need for a motorhome's 14 x 14-inch roof vent that uses a continuous hinge. We offer complete vent assemblies but also just the lids too, and in most hinge styles, including…

view full answer...

Answer 9

Atwood is no longer in business so those camper jacks are no longer something available for purchase. While I realize that's not what you wanted to hear, there are options for replacements that I wanted to mention so you have that option: -…

view full answer...

Answer 10

The Solera XL RV Window Awning Fabric and Roller, #LCV000369589 pairs with XL support arms #LCV000334764 that are sold separately to create a window awning for your RV. This fits windows 54" to 59" wide and 32" or taller. The awning…

view full answer...

Answer 11

The side of the shackles with two holes needs to be mounted on the bottom of the Lippert Center Point item #LC1565391. The side with the single hole connects to your leaf springs. I have linked an installation video below along with a couple of…

view full answer...

Answer 12

The Sew-In Snap Tape for RV Curtains part #37281005 use a standard size snap fitting which is not called out specifically by the manufacturer. The most important thing is to be sure you get the correct connectors based on your track such as the…

view full answer...

Is Tool Needed to Install Rubber Trim for RVs SR78FR

Product Page this Question was Asked From

Continue Researching