How to Get a Replacement Strap Buckle for a Yakima OnRamp Bike Rack

Question

Question:

looking for a replacement wheel strap buckle for Yakima on ramp bike hitch mounted 2 bike rack

asked by: Warren S

0

Expert Reply:

To get a replacement wheel strap buckle for your Yakima OnRamp Bike Rack # Y36FR you will need to get the Replacement Wheel Strap Assembly for Yakima OnRamp Bike Racks # Y38CR which is the entire wheel strap assembly, including the buckle.

expert reply by: Scott S

0

Answer 1

The real difference in which to get between the Yakima LoadWarrior with Extension, part #Y07070-74 and the Thule Canyon XT, part #TH859XT-8591XT will be between what kind of load bars you have equipped to the 2017 Toyota 4Runner and how its planned…

view full answer...

Answer 2

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 3

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 4

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 5

While it hasn't been tested (yet), the Yakima OnRamp #Y36FR has padded clamps to hold onto the mast of the scooter and wheel loops that could be wrapped around the base of the scooter to secure it in position. To line the padded clamps up with…

view full answer...

Answer 6

The Hollywood Racks Destination Bike Rack #HLY94FR can support up to 35 lb bikes so since you're needing to carry E-Bikes you need the Hollywood Racks Destination E Bike Rack #HLY66ZR instead, which is rated for up to 70 lb bikes. I know the…

view full answer...

Answer 7

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

How to Get a Replacement Strap Buckle for a Yakima OnRamp Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching