Troubleshooting Bargman LED Double Tail Light Not Functioning

Question:

i have a set of 47-84-610 light one of the light have is not working

asked by: Brian J

Expert Reply:

It sounds like your Bargman LED Double Tail Light was working before and now is no longer working. I would go ahead and check the wiring on the back of the light using a circuit tester like the # PTW2993 to make sure it is getting power.

If the wiring checks out then you probably need to replace the light. If it does not, then you will need to check out the wiring. Using the same circuit tester, check the connection at the back of your vehicle. This will let you determine if the problem is on the vehicle side or the trailer side.

If it is the trailer then I would inspect the connector on the trailer side and look for a short in the wiring. If it is on the vehicle side I would do the same to determine where the problem is and repair it.

If this was an installation issue then you want to double check your wiring and make sure it is hooked up correctly. You can also check to make sure you have a good ground connection.

expert reply by: Robin H