Best 5th Wheel Cargo Carrier for a 2 Inch Receiver

Question

Question:

Will this carrier hold a 168 pound generator on back of fifth wheel RV?

asked by: Gary H

1

Helpful Expert Reply:

Yes, it will hold your 168 lbs generator. The Curt Cargo Carrier item # C18152, measures 24" x 60" and has a 500 lbs capacity. This cargo carrier is rated to be used behind a 5th wheel trailer.

expert reply by: Jerred H

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 3

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

We noticed when we installed the etrailer Trailer Hitch Receiver #e98856 on a similar 2022 Jeep Wrangler it had 8" from the center of the hitch pin to the rear edge of the stock spare tire. This would likely not allow you to fold up the…

view full answer...

Answer 6

The 24x60 Curt Cargo Carrier for 2" Hitches, part #C18152, and the 24x60 Reese Cargo Carrier for 2" Hitches, part #63153, are extremely similar. In fact, in terms of the specs that you mentioned, neither stands above the other. I only…

view full answer...

Answer 7

The Hollywood Racks RV Rider #HLY64FR has a frame clamp design that was intended for use with step through style bike frame like what your Aventon Adventure bikes have so this rack would work perfect for you. I attached a picture that shows this…

view full answer...

Answer 8

Hello Jason, I just looked up those Finn Golf Scooters those things are pretty sweet. We do have a potential solution for carrying a Finn Golf Scooter, but there are no Thule products I am aware of that will work for this. Your best option for this…

view full answer...

Answer 9

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

view full answer...

Answer 10

Your best platform bike rack for spare clearance is the RV Rider part #HLY64FR as it has the most clearance between the hitch pin hole and the wheel trays. This has 12 inches from the pin hole to the pivoting portion of the rack but then has even…

view full answer...

Answer 11

Only certain bike racks are rated for use at the back of an RV or trailer but the Hollywood Racks #HR1400Z bike rack is not one of them. Generally, any rack that can fold or tilt, with few exceptions, won't be rated for this applications. The…

view full answer...

Answer 12

The Hollwood Racks #HLY64FR is an excellent choice for most users with an RV towed Jeep Wrangler. If your jeep has a standard size spare on the back, like the one in the picture I have attached, then you can see that you will have plenty of room with…

view full answer...

Best 5th Wheel Cargo Carrier for a 2 Inch Receiver

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching