What are the Inner Diameters of the Bearings Used in Trailer Hub # 845475UC1
Question:
will these bearings fit on a 1 1/16 outter and 1 3/8 inter spindle
asked by: Charlie
Expert Reply:
Bearings have very precise measurements, to the thousandth inch. The hub # 845475UC1 uses inner bearing # L68149. It has an inner diameter of 1.378 inches. The outer bearing is # L44649 and has an inner diameter of 1.063 inches.
While you could convert the measurements to fractions and it would be close to what you have the best way to determine the correct bearings is to go by the old bearing numbers stamped into the metal of the bearings or to get precise spindle measurements using dial or digital calipers.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Replacement Bearings for SnoPro Xtreme Clamshell Snowmobile Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Dexter 8-248 Hub, Races, Bearings and Grease Seals For Boat Trailer
- Q&A: How to Choose Correct Axle Placement for Tandem 7K Axles with Slipper Leaf Springs
- Q&A: What Size Trailer Wheel/Tire has Bolt Pattern 5 on 4-3/4 inch Available
- Q&A: Inner Diameter of the 1.98" Dee Maxx Stainless Steel Drive-In Grease Cap w/ Plug
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Where to Position the Trailer Axle?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure for Trailer Hitch Drop
- Article: Printable Trailer Bolt Hole Pattern Template