Replacement Leaf Spring Hangers For Escort/Calkins Tandem Axle Trailer With Offset
Question:
I have an older escort /calkins tandem axle trailer. I am needing to replace the front and rear axle hangers. Mine have a bit of offset at the top to accommodate the slant on the cross member. wil \l any 3 1/4 tall hanger work for me?
asked by: Pat B
0
Expert Reply:
The Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall # 28-5 would require a similar offset your escort/calkins tandem axle trailer to accommodate for the offset due to the slant you have. This hanger will work with leaf springs that are 1-3/4" wide.
expert reply by:
Bud M
0
Product Page this Question was Asked From
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Trailer Leaf Spring Suspension
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 3-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Does Changing From A 4 Leaf To A 6 Leaf Spring Add To Ride Height?
- Article: Where to Position the Trailer Axle?
- Q&A: Breaking In Replacement 6,000 lbs Leaf Springs
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Q&A: How Are Shackle Straps Supposed to Be Positioned When The Trailer Is Loaded?
- Q&A: Proper Position of Equalizer and Shackles on Trailer Suspension
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: Troubleshooting Trailer Axle Equalizer that Touches Trailer Frame
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)