Hollywood Racks Bike Rack that Can be Expanded to 4 Bike Rack

Question

Question:

Is there a 2 bike add on for this rack to hold up to 4 bikes?

asked by: Anna

0

Expert Reply:

Hollywood Racks has expandable bike racks like the Hollywood Racks Sport Rider SE2 # HR1450Z can expand using # HR1475Z but they do not have a way to expand the # HLY64FR to a 4 bike rack.

expert reply by: Jameson C

0

Answer 1

I have a great solution for you. Unfortunately, the Yakima HoldUp Bike Rack for 2 Bikes - 1-1/4" Hitches #Y02445 does not have a long enough ratcheting arm to allow you to attach your KBO e-bike to the frame tubes. With that being said, here…

view full answer...

Answer 2

The inner dimension of the 60" X 23" Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs #Y62VR5 are 51-11/16" long x 17-1/2" wide x 14-9/16" tall. I have attached a…

view full answer...

Answer 3

The Thule T2 Pro XTR 2 Bike Platform Rack - 2" Hitches #TH83JV is designed to hold the bikes by the wheels. It is not recommended to use on bikes with fenders. For that application I recommend the Hollywood Racks Sport Rider SE #HLY84FR.…

view full answer...

Answer 4

Wheel-mount bike racks like the Thule T2 Pro XTR #TH83JV aren't the best options for bikes with fenders for exactly the reason you mentioned. The ratcheting hooks would come down on the fender instead of the wheel which won't provide…

view full answer...

Answer 5

Yes, the Hollywood Racks RV Rider part #HLY64FR will do a great job carrying both the Trek Versa 2 and 3 without any additional adapters or braces. This comes with an anti-rattle device built into it as well so you would not need to use additional…

view full answer...

Answer 6

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with…

view full answer...

Answer 7

Yes, it will! The Saris SuperClamp EX 2 #SA4025F is approved for bikes with fenders by Saris. The way this works is that the front ratcheting hook needs to be clamped down on the wheel itself at the end of the front fender and that will prevent…

view full answer...

Answer 8

I have a solution for you, but the Saris SuperClamp EX4 #SA4026F cannot be used with bikes with fenders; you'll instead need to use a bike rack that holds the bikes by the frames. For that I recommend using the Saris Freedom 4 Bike Platform…

view full answer...

Answer 9

For a great platform bike rack that works with your 2 Lectric XP 2.0 step-thru bikes on your 2011 Forest River 32foot Class C Sunseeker Motorhome, I recommend the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches item…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 12

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike…

view full answer...

Hollywood Racks Bike Rack that Can be Expanded to 4 Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching