Replacement Controller for Lippert Components 6-Point Ground Control 2.0 Electric Leveling System

Question

Question:

Hi there! My motherboard went out and the part number is. 276452 However, that part number is about 2-3 times as much as the other ones from same company that have the fuses showing for the 6 point leveling system. Is there a reason why I can’t replace with this control board and have to use the other one? Thank you very much!

asked by: Andrew K

0

Expert Reply:

The Replacement 6-Point Controller for Lippert Components Ground Control 2.0 Electric Leveling System # LC56VR is the correct replacement for your 276452 controller. There are a few other controllers out there but they are for different models like the 3.0 system or 4 point instead of 6 point.

In order to be sure everything works as it should you will need to replace your 276452 controller with the Replacement 6-Point Controller for Lippert Components Ground Control 2.0 Electric Leveling System # LC56VR which is the 276452 controller.

expert reply by: Scott S

0

Answer 1

It sounds like you're looking for the Replacement Quick Level Touch Panel for Lippert Components Level-Up Hydraulic Leveling System #LC74FR which works with the Level-Up system. This is the touch pad "controller" but if you…

view full answer...

Answer 2

You will need the Replacement OneControl Advantage Controller #LC88TF for your 2018 Sanibel 5th wheel. This controller is the replacement for your number 425749 control box.

view full answer...

Answer 3

I sent all of this to my tech contact at LCI to see what they this is the problem and they were able to come up with a way to use the voltage readings to determine where the issue is: There are 4 wires on the harness as follows Black= power (need…

view full answer...

Answer 4

You cannot go by wire color in most cases because there is no real standard. We have blue for trailer brakes, yellow for left turn/brake lights, brown for running lights, green for right turn/brakes, black for 12 volt power, white for ground, and…

view full answer...

Answer 5

We spoken with Lippert in the past about this and they told us that the Comm Error you are experiencing means the controller and touch pad can't communicate. This is normally due to a wiring connection but if your harness is new and the…

view full answer...

Answer 6

If the touch pad is showing "Retract Time out Return Levelers for service" all you need to do is hit, enter and retract at the same time. That will clear that code. I confirmed this with our contacts at Lippert.

view full answer...

Answer 7

If you have the Ground Control 3.0, you need the Replacement Control Module part #LC304136 for 4-Point or part #LC85ED for 6-Point. If you need the control panel, that's the Replacement Control Panel for Lippert Ground Control 3.0 and…

view full answer...

Answer 8

Yes it is! I verified with the manufacturer that the Replacement Control Panel #LC421484 is the correct replacement for the one that comes with the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System - 6-Point Set #LC675817.

view full answer...

Answer 9

I reached out to Lippert who informed me your Power Gear controller 140-1224 Rev 0G is obsolete. It was replaced with the Lippert part number 372854 but that part is also now obsolete. At this point your options are to try and have your controller…

view full answer...

Answer 10

Josh, the bolt for the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 is 7/16" x 1/2" and needs to be torqued to 132 ft.-lbs.

view full answer...

Answer 11

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to…

view full answer...

Replacement Controller for Lippert Components 6-Point Ground Control 2.0 Electric Leveling System

Product Page this Question was Asked From

Continue Researching