Does Trailer Axle # T20BTR-6048 Fit AKIHUB-545-2-LF-2K Hubs
Question:
I have the AKIHUB-545-2-LF-2K hubs already. Just want to confirm T20BTR-6048 fits the hubs before I order. If not, which axles will fit? The springs are 48inch apart.
asked by: Nate
0
Expert Reply:
Yes the trailer hub part # AKIHUB-545-2-LF-2K does fit the axles part # T20BTR-6048 that you referenced. This axle also has the spring seat distance you need of 48 inches apart on center as well.
expert reply by:
Jameson C
0
Products Referenced in This Question
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Q&A: Hanger Spacing Recommendation for Leaf Spring that is 25-1/4 inches Long
- Article: How to Measure a Trailer Axle
- Article: How to Raise Your Travel Trailer Height
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Wiring configuration for Atwood GC6AA-10E Water Heater
- Q&A: Can Trailer Spindle be Bent Back In Place
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Determining Trailer Tongue Weight