How to Find Replacement Bearings for 1999 Champion 193 Bass Boat Trailer
Question:
I have a 1999 Champion boat and trailer. I want to change wheel bearings this summer. It is a single axle trailer and the boat that sets on it is a 1999 champion 193 bass boat. Trailer does have a folding tonge on it. Can you tell me what bearing set I need. I do not want Chinese made bearings.
asked by: Ray B
Expert Reply:
In order to find the replacement bearings for your boat trailer you will need some additional information. You may be able to identify your axle with the axle tag. From there, you could call the manufacturer to see what bearings the axle uses. If this does not work you will need to pull off your hubs and check your bearings.
If the part number is stamped in the bearings you can use that to identify them. If not, you will need to take some measurements. I recommend using a digital caliper like the # PTW2993. You will need to measure the inner diameter of your bearings or the spindle where the bearings ride. Once you know the inner diameter of the bearing you will be able to find the correct replacement.
I have attached a helpful diagram showing where to measure along with a link to all of our available bearings that you can filter down by inner diameter.
Products Referenced in This Question
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Tips for How to Identify a Trailer Axle