Would Fastway ONEstep XL Wheel Chocks Slide On Concrete

Question

Question:

Do they slide on hard surfaces like a concrete pad with a slope?

asked by: Lisa

0

Expert Reply:

The Fastway ONEstep XL Wheel Chocks for Tandem Axle Trailers and RVs # FA84-00-4150-2 that you referenced would not slide on concrete even with a slope. The weight of the trailer tire on the chock provides enough pressure to provide all of the traction needed.

expert reply by: Jameson C

0

Answer 1

I do not recommend using a parking brake of any type while the trailer is not in operation. The reason I don't is because locking the brakes up for extended periods of time can actually cause damage to the assemblies and will certainly drain the…

view full answer...

Answer 2

For your air seeding machine that weights about 7 tons, I recommend the Buyers Products #337WC1086UWH chock. These are heavy duty weighing about 9 lbs each and will work well for your application.

view full answer...

Answer 3

For your tandem axle trailer with a 23-1/4" measurement, you definitely want to go with the ONEstep that will work with distances up to 30": - Fastway ONEstep XL Wheel Chock for Tandem-Axle Trailers and RVs - 16" to 30" Long…

view full answer...

Answer 4

Yes, you can use Fastway ONEstep Wheel Chocks for Tandem-Axle Trailers and RVs part #FA84-00-4840 on your triple axle trailer. You would need 2 sets. The chocks adjust from 16" to 24". You do want to make sure the wheel spacing between the…

view full answer...

Answer 5

You simply measure between the tires about an inch off the ground to determine what Fastway chocks are the best fit for your application. We have the Fastway ONEstep Wheel Chock for Tandem-Axle Trailers and RVs - 16" to 24" Long…

view full answer...

Answer 6

The Fastway ONEstep wheel chock, part #FA84-00-4000 isn't a trailer specific item. As long as the spacing between the tires is between 16-24 inches as shown in the provided photo, the #FA84-00-4000 chock will work great for you. I've linked…

view full answer...

Answer 7

In order to determine the correct Fastway ONEstep Wheel Chocks, part #FA84-00-4150-2 or part #FA84-00-4840 you'd need to measure the distance between the tires where they meet the pavement. The former works with a spread of 16"-30" and…

view full answer...

Answer 8

That's a really good question, and while it may be technically possible to use the Fastway ONEstep Wheel Chocks for Tandem-Axle Trailers and RVs #FA84-00-4840 with blocks like the Ultra-Fab Leveling Blocks #UF48-979051, the issue is going to be…

view full answer...

Answer 9

In order to lock the Fastway ONEstep XL Wheel Chocks part #FA84-00-4150-2 you can use any pad lock with a shackle thickness up to 3/8". For this, the Master Lock Laminated Steel Padlock part #ML1KA will be a good option and it can be keyed alike…

view full answer...

Answer 10

Only one set of the Fastway ONEstep Wheel Chocks #FA84-00-4000 would be needed to prevent your trailer from moving. And since you'd only need to install the levelers on one side of the trailer the trick would be to install the ONEstep on the…

view full answer...

Answer 11

Since your driveway is on an incline the trailer will have to have the wheels chocked so it can't roll. Or it will have to be coupled to a tow vehicle while it is parked. It is hard to beat a good rubber chock such as #337WC1467A sold in…

view full answer...

Answer 12

The FasTen RV Leveling Blocks w/ Carrying Handle #CAM44512 can definitely be used to help jack up your travel trailer but then you'll want to add some chocks like part #FHG97ZR on either side of your tires to help ensure your trailer won't…

view full answer...

Would Fastway ONEstep XL Wheel Chocks Slide On Concrete

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching