Will the #42 E-Z Lube Spindle w/ Flange Work On Any Axle Between 5,200 and 7,000 Lbs
Question:
Are the tube specs different between 5200, 6k, and 7k? Or is it just the brake assembly and lug specs?
asked by: William K
0
Expert Reply:
The axle tube dimensions should be the same from anything between 5,200 - 7,000 lbs. I know for sure the outer diameter will be 3" as this is a standard but it would not hurt to measure the inner diameter when fittings the #42 E-Z Lube Spindle w/ Flange part # TRU37FR which has a stub diameter of 2-1/4". It's possible different manufactures use different axle beam thicknesses for an axle within the range above but it should be fairly standard.
expert reply by:
Conner L
0
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Where to Attach Safety Chains When Using a Gooseneck Plate in 5th Wheel Rails
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is Distance Between Mounting Holes of Dexter A-60 Coupler
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Does Chipped and Burned Spindle Need to Be Replaced
- Q&A: Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Q&A: Replacement Spindle Recommendation for Dexter # 42
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Correct Replacement Bearing and Race to Match 02475 Bearing and 14276 Race
- Q&A: Replacement Seal for National Seal or Timken Seal 472920