What is the Purpose of Third Mounting Hole on Demco Hydraulic Brake Actuator w/ Electric Lockout
Question:
What is the purpose of the third hole that is between and lower than the two primary mounting holes? Is this for a bolt to secure safety chains?
asked by: Mark
Expert Reply:
The third hole on the Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs # DM62VR is for an additional bolt for mounting. The other two holes are required for mounting the actuator, the one you are referencing is optional. You could choose to drill a third hole to make use of this or just use the top two.
Safety chains are typically mounted to the trailer. If you need to add mounting brackets for safety chains you would need something like the # MB12 or # MB58.
![Robin H](https://images.etrailer.com/static/images/catg/people/2659_tn.jpg)
Products Referenced in This Question
Brophy Safety Chain Mounting Bracket - 6-1/8" Long x 1/2" Diameter - Weld On - Qty 1
- Accessories and Parts
- Tow Bar
- Trailer Safety Chains
- Safety Chain Parts
- 1/2 Inch Diameter
- Mounting Brackets
- 6-1/8 Inch Long
- Brophy
more information >
Brophy Safety Chain Mounting Bracket - 8-3/8" Long x 5/8" Diameter - Weld On - Qty 1
- Accessories and Parts
- Tow Bar
- Trailer Safety Chains
- Safety Chain Parts
- 5/8 Inch Diameter
- Mounting Brackets
- 8-3/8 Inch Long
- Brophy
more information >
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Agricultural
- Construction
- Marine
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- Disc Brakes
- Electric Lockout
- Demco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Replacement Surge Brake Actuator For Atwood 61101
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Recommendation for Replacing Torsion Axle on Ez Loader Boat Trailer
- Q&A: How to Convert a Trailer with Surge Brakes to Electric Over Hydraulic Brakes
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Bearing Kit and Brakes for a 2003 Boat Trailer with 3,500 lb Axles
- Article: Most Popular Wheel Bearings
- Article: Trailer Couplers