Replacement Hub and Drum Assembly for 15,000 Pound Axles
Question:
Hello, I’m looking for a solution to rebuild/retrofit the hubs on a 1980’s Miller Tilt Top tag trailer. The axles are 15k, floating tandem duallies with greased bearings. Ultimate goal is to get away from the clamped split rim and go to a more modern setup.
asked by: Matthew F
Expert Reply:
Although I do not have an option to retrofit your hubs I do have a solution. What I can offer is a complete replacement with the Dexter Trailer Hub and Drum Assembly for Heavy-Duty 15K Axles # DX78QR. If you're just looking for replacement races, bearings, and seals we have those available as well.
This hub uses an 8 on 275 mm bolt pattern. It would also require switching to oil bath from the grease. In addition to the hub and drum assembly, or for replacement bearings and seals, you would need the following parts:
Replacement Dexter Axle 4-3/4" x 1-1/2"-20 Press-In Wheel Stud - Qty 1 # DX97XR
Replacement Race for 3984 Bearing # 3920
Replacement Race for 28682 Bearing # 28622
Replacement Trailer Hub Bearing - 3984 # 3984
Replacement Trailer Hub Bearing - 28682 # 28682
Replacement Brake Drum Mounting Bolt for Dexter Trailer Hub Assembly - 10,000 lbs - Qty 1 # 7-103
Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle # RG04-270
Oil Seal # 10-56 (this can be used with grease as well)
Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle # XLPROLUBE
I have attached some review and installation videos for your reference.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 3.125 Inch I.D.
- 4.500 Inch O.D.
- Redline
more information >
Replacement Race for 28682 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 3.844 Inch O.D.
- Bearing 28682
- Race 28622
- 12000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 28682
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.250 Inch I.D.
- Bearing 28682
- Race 28622
- 12000 lbs Axle
- etrailer
more information >
Replacement Race for 3984 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 4.438 Inch O.D.
- Bearing 3984
- Race 3920
- 12000 lbs Axle
- 15000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 3984
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.625 Inch I.D.
- Bearing 3984
- Race 3920
- 12000 lbs Axle
- 15000 lbs Axle
- etrailer
more information >
Replacement Brake Drum Mounting Bolt for Dexter Trailer Hub Assembly - 10,000 lbs - Qty 1
- Accessories and Parts
- Trailer Hubs and Drums
- Hardware
- Bolts
- Dexter
more information >
Replacement Dexter 4-3/4" x 1-1/2"-20 Press-In Wheel Stud - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Press-In Stud
- 4-3/4 Inch Long
- Dexter
more information >
Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 3.984 Inch O.D.
- Redline
more information >
Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle
- Lubricants Sealants Adhesives
- Oil
- Bearing Oil
- 8 oz
- Kodiak
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for Heavy-Duty 15K Axles - 8 on 275mm Oil Bath
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 3984
- 28682
- For 15000 lbs Axles
- 5/8 Inch Stud
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for Heavy-Duty 15K Axles - 8 on 275mm Oil Bath
- Q&A: Availability of Trailer Brake Drum for Dexter 023-447-00 15,000 Pound Brake Assembly
- Shop: Oil Seal
- Shop: Replacement Race for 28682 Bearing
- Shop: Replacement Race for 3984 Bearing
- Shop: Dexter Electric Brake Assembly w/ Cast Backing - Self-Adjusting - 12-1/4" - Left Hand - 15K
- Search Results: 23~446
- Search Results: 3920
- Shop: Replacement Brake Shoes for Dexter 12-1/4" Duo-Servo Hydraulic Brake Assembly - Right Hand
- Shop: Replacement Shoe Kit for Dexter 12" x 2" Manual Adjust Electric Brake Assembly - 7K
- Search Results: 9~28
- Search Results: trailer axle
- Search Results: trailer axle with idler hubs
- Search Results: 23~180
- Search Results: 8~385
- Q&A: Minimum Brake Pad Thickness for a 12-1/4 Inch x 4 Inch Trailer Braking Assembly
- Q&A: Electric Brake Conversion from Air Brakes on 15,000 lb Axle Trailer
- Video: Review of Dexter Axle Replacement Brake Drum Mounting Bolt - 7-103
- Video: Review of Dexter Axle 12-1/4 Inch x 5 Inch Brake Drum For 12K And 15K Axle 8 On 6-1/2 - DX34XR
- Video: Review of Dexter Axle Trailer Hubs and Drums - Hub And Drum for Heavy-Duty 15K Axles - DX78QR
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Q&A: Torque Spec for 10 Inch Dexter Electric Brake Assembly
- Q&A: Can I Use Dexter Components on Lippert Axles and Vice Versa?
- Q&A: Can Hub and Brake Drum Be Replaced with Idler Hub on Tandem Axle Trailer
- Q&A: Torque Spec for Tightening Trailer Brake Assemblies to Trailer Spindle
- Video: Review of a Trailer Suspension Enhancement System - TTRA15252
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub