Recommended Flat Towing Equipment For A 2014 Honda CR-V

Question:

What do I need to set up a 2014 Honda CRV to tow with my Thor Citation Sprinter Class c Motorhome?

asked by: Susan

Expert Reply:

The main components needed to flat tow your 2014 Honda CR-V are a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you below:

Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates # e74ZR. This tow bar is specifically designed to fit Roadmaster direct-connect base plates. It features non-binding latches and telescoping, self supporting arms that make connecting and disconnecting your CR-V on any terrain a breeze. It has an adjustable head that tilts up or down 3" and the shank has a built-in 1-1/2" rise or drop to keep tow bar parallel with road while towing without the use of a high/low hitch adapter. It also comes with safety cables included.

Base Plate: Roadmaster Direct-Connect Base Plate Kit # RM-521567-5. These direct-connect style attachment points provide a quick and easy hookup/removal. The arms are removable to provide a clean factory look when not in use.

Note: This Base Plate Kit does not fit models with extra bumper trim package.

Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This diode kit allows you to use your Honda CR-V's tail lights and wiring system while preventing feedback from your RV.

Fuse(s) must be pulled during towing. Please check owner's manual for which specific fuses need to be pulled; if your owner's manual says to only pull the #19 ACC radio fuse, use part # RM76511; if it states to pull the #19 ACC radio fuse and the #20 ACC key lock fuse, use part # RM76512.

Honda did have a misprint in their manuals so it may incorrectly display which location the 19 ACC fuse is located, I've attach a diagram below showing the correct location.

Braking System: The Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494 you were looking at would be a great choice. It provides reliable braking with a lightweight, portable system. The actuator unit applies towed car's brakes after receiving signal via internal inertia sensor. Braking power settings let you adjust brake intensity based on your towed car's weight. It comes with a wireless receiver that plugs into a 12V accessory outlet in the cab of RV and illuminates when the system is activated and also gives off an audible alert during a breakaway event. The included 15amp charge line kit will also keep your CR-V's battery charged while you tow.

Safety Cables: Since the # e74ZR already has safety cables included you won't need to purchase any separately.