Longest Weight Distribution Shank
Question:
I have an 18 F250 and pull a 37ft travel trailer that weighs roughly 9k. I use an Equalizer E4 WDH. I want to extend it maybe 8-12 inches. Enough to get my tailgate down. Also, if I turn sharp in a cul de sac the rear bed corner will bump the cap of the camper. The extender should help with this.
asked by: Roger
Expert Reply:
The longest weight distribution shake is the 18" Long Equal-i-zer Weight Distribution Shank item # EQ90-02-4600. It has an 8" rise, a 4" drop, and has a 600 lbs - 1,400 lbs tongue weight range. I have linked a diagram of both this shank and the standard shank that comes with systems like the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item # EQ37120ET. We also have the 18" Long Equal-i-zer Weight Dist Shank Item # EQ90-02-4500 that only has a 7" rise and 3" drop. As you can see by the diagrams the longest shank only gains you 6 of the 8-12 inches you were looking for. This will address the issue you have with your turning radius but it may not be enough to allow your tailgate to fully open.
With your trailer weight this is going to be your only option. Unless your 2018 Ford F-250 Super Duty has a TorkLift SuperHitch item # TLF1008-30 and you can use the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long item # TLE1548. None of the hitch extenders have a capacity as high as you need.
Products Referenced in This Question
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- Equal-i-zer
more information >
Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1600 lbs TW
- 16000 lbs GTW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 4 Inch Drop
- Square - 8 Inch Rise
- Equal-i-zer
more information >
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long
- Hitch Adapters
- Hitch Extender
- Trailers
- 48 Inch Extension
- Fits 2 Inch Hitch
- 6500 lbs
- TorkLift
more information >
TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2500 lbs TW
- 20000 lbs GTW
- 30000 lbs WD GTW
- 2-1/2 Inch Hitch
- 2 Inch Hitch
- 3000 lbs WD TW
- Visible Cross Tube
- TorkLift
more information >
Product Page this Question was Asked From
Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision
- Accessories and Parts
- Backup Camera
- Third Brake Light
- Third Brake Light Camera
- For 8 Inch Factory Monitor
- GCH Automotive
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Q&A: Recommended Weight Distribution Hitch for Camper With 955 Pound Tongue Weight
- Q&A: Extended Shank for a Weight Distribution System
- Q&A: Longest Shank for Weight Distribution System
- Q&A: Recommendation on a Weight Distribution and Sway Control with an 18 Inch Shank Extension
- Q&A: Weight Distribution Hitch System For a 2021 Ford F-250 With Slide In Camper And 1,500LB Hitch Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Shop: Replacement Spacer Rivet and Washers for Equal-i-zer Weight Distribution Head
- Shop: Spacer Washer for Fastway e2 Weight Distribution Head - Qty 1
- Shop: Curt Extender for 2" Hitch Receivers -18" Long
- Search Results: 18 shank
- Video: Blue Ox SwayPro Weight Distribution System Manufacturer Demo
- Search Results: 44649
- Shop: Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Trailer Hitch
- Article: Determining Trailer Tongue Weight
- Search Results: 68149
- Shop: Trailer Wiring
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Search Results: 25580
- Article: How to Measure for Trailer Hitch Drop
- Shop: Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long
- Shop: Suspension Enhancement
- Search Results: hitch extension
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Search Results: 10~51
- Search Results: 14125a
- Shop: Fifth Wheel Hitch