How to Find Bearing Buddy Size for 5 x 8 Lowes Utility Trailer
Question:
I have a 5x8 Lowes utility trailer. I bought a set of bearing buddys that I thought would work and it matched the cap that was on there when you put them side by side but would not go in. Do you have any idea from your experience what the size would be for a trailer that small?
asked by: Erik G
Expert Reply:
In order to find the right bearing buddy size for your 5x8 Lowes utility trailer you are going to need to measure the inside diameter of your hub bore. You will need a very accurate measurement so I recommend using a digital caliper like the # PTW80157.
Once you have this measurement you will be able to match it up with a bearing buddy if one is available. For example, if you get a measurement of 1.980" then you would be able to use the Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair) # BB1980A-SS you looked at.
I have attached an installation video along with a link to all of our bearing buddy bearing protectors which you can filter down by hub bore diameter.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Possible Bearing Buddy that Could Fit Hub with Seal 12194TC
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Replacement Stainless Steel Kodiak Trailer Brake Kit For 6,000LB Axle With 6 On 5-1/2 Bolt Pattern