Parts Needed to Add Brakes to 2015 Crossroads Zinger 26DT
Question:
Hello I have a 2015 crossroads zinger 26dt trailer. From some online searching it looks like only 1 of my axles has electric brakes. Do you guys sell a kit that has everything I would need to convert the axle without brakes to one with? From the looks of it, it seems like the brakes them selves are relatively cheap, and Im sure wiring is no more than connecting to the existing wires for the other axle. Anyways I hope to hear from you soon. Have a great day.
asked by: Jon B
Expert Reply:
We definitely have the parts needed to add brakes to your idler axle but we do not have them as a complete kit. What you'd need for hubs for your 2015 Crossroads Zinger 26DT is the part # AKHD-655-35-EZ-K which are pre-greased and then for brake assemblies you'd just need the # AKEBRK-35-SA for a set of left and right hand brake assemblies.
You'd want to use 10 gauge wire like part # 10-1-1 for wiring up the new assemblies.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Article: Most Popular Wheel Bearings
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Article: Trailer Tire Sizing
- Q&A: Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
- Q&A: Parts Needed to Replace 12" Disc Brakes with Electric Drum Brakes
- Q&A: Replacement Hub And Bearing Kit For An AL-KO 8460 Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 6k Hub Drum that Can Fit Timbren Axle Less Kit part # ASR1THDS03
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Trailer Hub Wont Slide Onto the Spindle of a Timbren Axle-Less System
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams