Replacement Trailer Spindle for 3 inch Diameter Trailer Axle
Question:
I have a 2004 Jayco 27BH. I want to replace the spindles with ones that come straight out. The axle tube is 3 in diameter. The drum is 10 the attaches to a 4 hole spindle. Do you have a spindle that will work to replace these with?
asked by: Kenneth R
0
Expert Reply:
Since your axle diameter is 3 inch that would mean that your axle capacity is between 5.2k and 7k so for a replacement spindle the EZ Lube Spindle part # TRU37FR would fit and work well. This has a 5 bolt spindle though.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: Dimensions of TRU37FR Replacement E-Z Lube Spindle
- Q&A: Dimensions of Trailer Spindle TRU37FR
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Q&A: Removing and Replacing Trailer Spindles
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Hub/Drum and Brake Assemblies for Dexter 12k Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How To Remove Spindles From Trailer Axle
- Q&A: How Can the #42 E-Z Lube Spindle Fit Both a 5.2K and 7K Axles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review