Where is the Automatic Changeover RV LP Gas Regulator Made

Question

Question:

Hello can you please tell me what country this item is made in Item # 37207-30395. Thank you,

asked by: Patti

0

Expert Reply:

I spoke to JR Products, the Automatic Changeover RV LP Gas Regulator part # 37207-30395 is made in the USA, NY to be specific.

expert reply by: Conner L

0

Answer 1

JR Products Automatic Changeover 2-Stage Propane Regulator #37207-30395 is an automatic changeover so the handle up top that you turn actually only changes the sensor over between the tanks so that you can how full they are. The only way to shut…

view full answer...

Answer 2

The Automatic Changeover RV LP Gas Regulator #37207-30395 will indicate RED for an empty tank or if it does not detect propane. If you have your tanks turned off it will stay red. When you turn a tank on the valve indicator will turn green. It does…

view full answer...

Answer 3

Yes, if you are talking about the inner of a propane regulator. The 3/8" male NPT fitting on the 3 hoses you asked about and are listed below, is the most common size for a regulator. But, there are some that use other sizes so you would want to…

view full answer...

Answer 4

The correct replacement for your Winntec 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as these regulators have the same fitting sizes are the same. The #37207-30395 has a BTU rating of 345,000 BTU, compared to the 267,000 BTU…

view full answer...

Answer 5

In order to test an automatic changover regulator like the Automatic Changeover RV LP Gas Regulator #37207-30395, you'll want to follow the test procedures outlined below: 1. Rotate the cylinder selector lever fully towards one of the cylinders.…

view full answer...

Answer 6

Based on the pictures I could find for the Marshall 605h model 250 it's an automatic changeover 2 stage regulator so you'll want the Automatic Changeover RV LP Gas Regulator Item #37207-30395. If your regulator is a different design then…

view full answer...

Answer 7

We have what you are looking for but your regulator currently vents out of the bottom of the regulator and the one you referenced vents out of the side. So to match the correct orientation you'd want the part #CAM59313.

view full answer...

Answer 8

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 9

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...

Answer 12

Yes, the Automatic Changeover RV LP Gas Regulator #37207-30395 will work to replace your Winntec 6020. This regulator uses the same sized fittings as your 6020 and the BTU rating of this is compatible.

view full answer...

Where is the Automatic Changeover RV LP Gas Regulator Made

Product Page this Question was Asked From

Continue Researching