How Much Does the Stromberg Carlson Bike Bunk # CC-275 Weigh?

Question

Question:

How much does it weigh? I couldn’t find it in the description.

asked by: Ben H

1

Helpful Expert Reply:

The Stromberg Carlson Bike Bunk Trailer # CC-275 weighs a total of 47 pounds.

expert reply by: Bob C

1

Answer 1

The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier #CC-275 referenced in your question will fit any trailer A-frame between 14 and 55 inches wide. The distance from the top of the trailer A-frame to the top of the cross tube on the…

view full answer...

Answer 2

The Stromberg Carlson Bike Bunk #CC-275 should not interfere with the weight distribution brackets mounted on the frame of your trailer. Take a look at the picture I have included. This trailer has weight distribution brackets on it and the Bike Bunk…

view full answer...

Answer 3

I looked up some pictures of your 2014 Airstream International and the only place you are going to be able to install a bike rack is over the a-frame of the coupler with the #CC-275 and a hitch bike rack. The most popular bike rack we carry that has…

view full answer...

Answer 4

From the top of the trailer frame to the top of the Stromberg Carlson Bike Bunk #CC-275 measures 33 inches. The drilling required is for the uprights so that they mounting hardware fits through them at the right angle for your trailer.

view full answer...

Answer 5

I have a solution for you, and I'll start out by saying that I cannot recommend using a dual hitch adapter like the Malone 2" Dual Purpose Hitch Receiver #MPG544 because it reduces the tongue weight capacity of the hitch on your 2013 Toyota…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 10

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

How Much Does the Stromberg Carlson Bike Bunk # CC-275 Weigh?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching