Front Mounted Receiver and Cargo Carrier Suggested for 2015 Ford F-250
Question:
Hello, I have a 2015 F250 with the FX4 package. 6 3\4 bed. No snowplow package. Rear air bags. I have a slide in camper weighing 1700 lbs. Im thinking about attaching a front mount hitch to be able to carry approximately 75 lbs of equipment on a carrier attached to the hitch. Can you advise if my truck could handle the additional weight on the front end, if I need to beef up springs or shocks and recommend a front mount hitch and carrier, approximately 20 wide by 36 long, just for this purpose? Thank you for any information or advise you can provide.
asked by: Gary C
Expert Reply:
Let's begin with the hitch. For that, the Draw-Tite # 65049 you'd looked at would work great for you.
For a cargo carrier, the 20x48 Reese # 6502 is the closest thing we offer to the 20x36 dimension you mentioned. The carrier itself weighs about 45 lbs. When coupled with the 75 lbs of equipment you're wanting to carry, you're looking at about 120 lbs which your front suspension should handle just fine as that weight isn't a whole lot more than what many grille guards weigh.
I've linked to an install video for the front hitch as well as to a demonstration video for the cargo carrying tray I recommended.
Products Referenced in This Question
20x48 Reese Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Folding Carrier
- 20 Inch Wide
- Heavy Duty
- Fits 2 Inch Hitch
- 48 Inch Long
- Class III
- Class IV
- Steel
- Reese
more information >
Product Page this Question was Asked From
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Custom Fit Hitch
- Front Mount Hitch
- 500 lbs Vert Load
- 9000 lbs Line Pull
- 2 Inch Hitch
- Square Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Is The Glass Top Of The Furrion 2-in-1 Range Oven Removable
- Q&A: Is the Grate on the Furrion 2-in-1 Range Oven Die Cast or Stamped Enamel
- Q&A: Can Front-Mount Hitch Be Installed On 2011 Ford F-150 4x4 With Grille Guard Installed
- Q&A: Front Hitch and Motorcycle Carrier for Ford F-350
- Q&A: How Does the Handle Work on the Lippert Components Spare Tire Winch 159056
- Q&A: Spare Wheel for a 2014 Thor Chateau 22E Motorhome
- Q&A: What is Trailer Wheel Pilot Diameter
- Article: Trailer Hitch Receiver Sizes
- Article: Anti-Rattle Devices
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Mount a Truck Bed Camper
- Article: Trailer Wiring Diagrams
- Article: 2 Steps for Hooking Up an External Propane Tank to Your RV