10" Electric Trailer Brake Assemblies For 4,400LB Axles With 3-1/4" Lower Bolts and 2-7/8" Top Bolts
Question:
Trailer has 3 1/4inch top 2 studs, standard 2 7/8inch bottom 2 studs. Replacement 10inch brakes for this?
asked by: Chris
Expert Reply:
The Dexter Electric Trailer Brake Kit # K23-462-463-00 and Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 for 4,400LB axles have a similar bolt pattern. They have 2-7/8" measured on the top 2 bolts and 3-1/4" spread on the bottom 2 bolts, so either the numbers got entered in the wrong order or someone may have flipped the axle rather than using the proper Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00. The brakes are still the 10" diameter by 2-1/4" wide.
(click to enlarge)
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 4400 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 4400 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Difference Between Dexter 3500 lb and 4400 lb Brake Assemblies
- Article: Most Popular Wheel Bearings
- Q&A: Dexter Replacement Hub/Drum Assembly # K08-247-1G
- Q&A: Replacement Brake Assembly and Grease Seal for AL-KO T44 Axle
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Replacement Lug Stud for Dico Trailer Hub Assembly 45263
- Q&A: Replacing Bearing Seals on Older DICO Hub and Drum
- Q&A: Replacement Hub and Drum Assembly for Lippert 4,400 lb Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Using a Portable Generator on RV
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Wiring Diagrams