Replacement Spindle Washer for a Trailer that Uses L44649 Inner and Outer Bearings
Question:
I have a trailer axle that is 1-1/16inch and takes an L44649 bearing. I accidentally threw away the spindle washer and need a few more just in case I throw more away and to have some spares. I see that you all have a 1inch spindle washer but not an 1-1/16inch one, will that one work? The axle is not a D ring type.
asked by: Tim F
Expert Reply:
We currently offer several different spindle washers and I have included a link to them for you. However, none of then have an inner diameter of 1-1/16 inches. I recommend using a set of digital calipers to take the measurement because it needs to be as accurate as possible and traditional measuring devices are not quite accurate enough.
You mentioned that the trailer takes L44649 bearings. If both the bearings are the same size then the washer associated with the size spindle that takes these bearings is # 5-101.
Products Referenced in This Question
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Article: Most Popular Wheel Bearings
- Shop: Spindle Nut Kit for EZ Lube Axles
- Q&A: Washers Compatible With 7/8 Inch Castle Nut
- Shop: D Washer for EZ Lube Spindles
- Shop: Spindle Nut for Axles with 7/8" - 14 Castle Nut
- Shop: Washer Spindle Tongue
- Search Results: bt150a
- Video: Review of TruRyde Replacement Tang Type Spindle Washer E-Z Lube - 5-101
- Search Results: trailer spindle washer
- Search Results: tang washer
- Search Results: spindle nuts
- Search Results: spindle nut washers
- Search Results: spindle washer 7 8
- Search Results: castle nuts
- Q&A: Trailer Hydraulic Brake Line Tee Fittings
- Q&A: Correct Replacement Bleeder Valve for Kodiak DBC-225 Disc Brake Calipers
- Q&A: Does Replacement Adapter Port # K22590A Fit Kodiak Brake Systems
- Q&A: Availability of Brake Line Fitting to go from 1/8 inch Male NPT to 3/16 Female FIF
- Q&A: Brake Line Kit that is 15 Feet Long with 3/16 inch Fitting on One End and 1/8 inch on Other
- Q&A: Electric Over Hydraulic Disc Brake Set Up For a 12' Dump Trailer
- Video: Removing and Replacing Trailer Brake Shoes Review
- Video: Review of Redline Replacement Trailer Spindle Jam Nut - 6-191
- Video: etrailer Trailer Bearings Races Seals Caps - Seals - 58846 Review
- Video: Redline Trailer Spindles 165931 Review
- Video: Review of Dexter Axle Trailer Spindles - Replacement Spindle Nut - DX88QR
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide