Replacement Hub for 10,000 Pound AL-KO Axle

Question:

Hello I have a 2010 load max trailer it has dual tandom axles It is rated for 22k I have sent pictures or axle and hub.

asked by: Corey G

Expert Reply:

In order to find the correct replacement hub for your 2010 Load Max trailer with 10,000 lb AL-KO axles you are going to need to know what bearings it uses. You can inspect your current bearings and look for part numbers, or if you are unable to find them/they have worn off you will need to measure.

You will be looking for the inner diameter of the bearings. You can measure the bearings, or where they ride on the spindle, using a digital caliper like the # PTW80157. Once this is done you will be able to match them up with the correct replacement hub.

I have attached a helpful diagram showing where to measure along with a link to all of our 10,000 lb hubs that can be filtered down according to the bearing size.

expert reply by: Robin H