Choosing the Right Ball Mount for 2 Different Trailers and a 2013 Dodge Ram 2500 w/2-1/2 Inch Hitch
Question:
I just purchased a 2013 RAM 2500 4X4, was driving an 08 Ram 1500. I pull a steel 2 horse slant trailer and 2 jet skis. I know I will need new ball mounts for each. Im not sold on the adjustable, too afraid!!! What might you suggest for each trailer?? Also my receiver is 2.5. Should I purchase that size ball mount OR use an adaptor to reduce it to 2?
asked by: Tracey
Expert Reply:
First, I would use a 2-1/2 inch ball mount for the 2-1/2 inch hitch on your 2013 Dodge Ram 2500. Going with the matching size will fit better than using a reducer sleeve.
Normally I would say an adjustable ball mount is the way to go except you have reservations about them. If you change your mind I have included a link to the adjustable ball mounts that fit a 2-1/2 inch receiver.
For fixed ball mounts you will need to do some measuring to determine the correct rise or drop you will need for each trailer. I have included a link to our FAQ article that explains how you will need to measure to select the correct ball mounts. I have also included a link to the 2-1/2 inch fixed ball mounts for you.
Product Page this Question was Asked From
Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Steel vs. Aluminum Ball Mounts
- Q&A: Recommendation to Help Back and Forth Movement in Trailer Hitch While Towing
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Wiring Adapter For 2009 Porsche Cayenne With 7-Way Connector Towing Trailer With 4-Pole Connector
- Q&A: Hitch Pin to Pin Hole Dimension for Curt Slim Adjustable Ball Mount C46KR
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Regulator and Pigtail Hose for Champion 3500 Dual Generator Model 100264
- Q&A: Replacement Actuator for a TDE Model LP7000
- Q&A: Does 2019 Toyota Highlander Need Auxiliary Transmission Cooler to Tow Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub